BLOG
Din Standard Plastic Instrument Cases
Date : Wednesday, 14 September 2011
This family of Plastic instrument cases is molded in ABS plastic in one piece. These are suitable for Panel Flush mounting Analog and Digital Instruments & few are suitable for Table Top as well as plug in module. Case available with cassette, which provides mounting facilities for inside assembly as well as for front and back components. The cassette for all cases is very versatile frame assembly. The front panel plate and back plate of cassette are of plastic material hence cut out requires for mounting components like Display, Potentiometer, Thumb wheel switch or at back Terminal strip etc. can simply be punched or drilled. The Front Plates are also available with few standard cut outs. Back plate is available in plain type and with in built molded Terminal type with option of solder able terminal connector or direct pcb insertion type connectors. The two plastic front & back plates are joined by either one Metal Base plate and two Metal drilled angels, Which offers mounting facilities for PCBs, Relays, Transformers, etc. or Directly by full length pcb in case of Back plate with pcb insertion type connectors. The entire cassette when slides into the case is secured by means of screws at rear.
CASE SIZES :
( 1 ) IC - 110 : 96 x 96 x 110 mm , ( 2 ) IC - 150 : 96 x 96 x 150 mm
( 3 ) IC - 148 : 96 x 48 x 110 mm, ( 4 ) IC - 048 : 96 x 48 x 150 mm
( 5 ) IC - 072 : 72 x 72 x 110 mm, ( 6 ) IC - 192 : 96 x 192 x 200 mm
( 7 ) IC - 248 : 48 x 48 x 90 mm
Typical applications of Cases: Temperature controller, Temp. Indicator, Multipoint temp Indicator, Digital Timers, Ph. meter, Digital counters, Frequency counters, D. P. M., etc.
Read More...Universal Din Rail Enclosures / PCB Holders
Date : Wednesday, 14 September 2011
Universal Din Rail Enclosures
Universal Enclosures are distinguished by its modular design and universal mounting. It has Integral molded PCB guides for Base PCB and auxiliary Vertical & Horizontal PCBs. It also offers flexibility in I/O Terminal as fixed as well as euro terminals with customer specific configuration by knock out blanks terminal covers. Modular construction of enclosure provides ease in design and servicing of Instrument.
Features
Universal mounting in all three commercially available rails. EN 60 715 TH35, TH15 and G32 DIN rails.
Modular construction enables ease in design and servicing.
Enclosures inside: 70 x 35/70/105/140 x 60 mm.
PCBs: Base PCB and auxiliary Vertical & Horizontal PCBs
PCB guides: Integral molded guides in all directions.
Terminal Option: Euro 5mm pitch OR Fixed 3.75 mm pitch.
Knockout blanks for individual terminal configuration in covers of Euro Terminal version
Top cover available with countersunk screws as option.
The system:
Enclosure assembly consists of 35 mm Foot pieces, Spacer piece with End pieces and Top cover. Foot piece provides fixing for complete assembly by simple snap fitting on all three rails. Enclosure has Integral molded PCB guides for Base PCB and auxiliary Vertical & Horizontal PCBs.
Standard Models: - The Four standard Models in Enclosures offered are
Enclosures: - (1) UE / UEC - 035 (2) UE / UEC - 070 (3) UE / UEC - 105 (4) UE / UEC - 140
Application Of Enclosures: - Ideal for housing Electrical, Electronics & Electromechanical Devices like...Relays, Timers, Transducers, Transmitters, Sensing and Monitoring Devices.
Universal Din Rail PCB Holders
Universal Holders provides quick & easy mounting of PCBs on all three Rails. Modular design concept allows variable length of PCBs. Active & passive Interface modules used in Electrical circuits with Electronic system as one of its use.
Standard Models: - The Eight standard Models in Holders offered are
Holders: - (1) UH - 035 (2) UH - 070 (3) UH - 105 (4) UH - 140 (5) UH - 175 (6) UH - 210 (7) UH -245 (8) UH -280
Application Of Holders :- Interface modules for...Din Connectors, Sub Miniature Din Connectors, Flat Cable Connectors & Modules of Relays, Opto coupler, Switch, Fuse, Diodes, Veristor, Power supply, Over Voltage protection, Data Transmission & Receiving, Analog / Digital Converter etc.
Read More...FUTURA DIN PLASTIC CASE
Date : Wednesday, 14 September 2011
FUTURA DIN PLASTIC CASE
Terminals: Plug-In/Surface Mount/Wire Jumper!!!
FUTURA Case (96x96x110mm) offers technically superior and attractive packaging to Instruments. Snap-together parts design, three innovative Terminal-to-board connection options, and high esthetical erosion-structure surface with ventilation are its distinctive features. Case manufactured in accordance with DIN 43 700 has a large variety of applications in panel flush mounting analog and digital instruments especially suitable for measuring and control technology.
Main Features: * Snap-together design * Accommodate 4 PCBs * Snap-On latches for display PCB * 16 Terminals * Three Terminal-To-board Connection Options * Plug-In Version-leaf spring contact offers quick connection, fast replacement reduces down time * Surface Mount Version-eliminates wiring, cost effective for higher volume * Wire Jumper Version-can be customloaded for application configuration & to reduce cost * IP-20 Protection (finger protected) snap fit Terminal Cover * Easy assembly and disassembly for servicing * Ventilation slots for effective heat dissipation * Attractive structured surface * Customized cutouts and holes possible * Panel Mounting with attractive clamps * Choice of material (plastic) & Color ABS - White, Black & Dark Gray, Polycarbonate - Fire Retardant UL 94V-0 at 1mm (Lexan-943) - White
Read More...Modulbox-Dualmount-22.5
Date : Wednesday, 14 September 2011
Modulbox-Dualmount-22.5
Rail Mount and Wall Mount
Designed as per DIN43 880 (MCB Type)
Modulbox-Dualmount-22.5 - a versatile, compact enclosure is ideal for housing small devises like I/O circuits, relays, timers etc. Enclosure is having wall as well as DIN rail mounting facility. It is designed as per DIN 43880 has cover face of 45mm high enables it to mount within large international style enclosures / distribution system with 45 mm cutouts like MCB.
Features
* Dimensional size per DIN 43 880 - Can be mounted with Distribution system along with MCB
* Snap-together design speeds up assembly.
* Two PCBs, Base PCB fixed on Base Plate, Vertical PCB for which cover has integral molded guides.
* Innovative Clips design facilitates Wall / Rail Mount to Enclosures by changing its position in Base plate.
* Max. 8 Terminal (4+4) - standard 5mm pitch
* Air ventilation - having slots for ventilation.
* Protection - IP20 (finger protected) Protection against accidental contact
* Terminals are optional - Enclosure supplied with / without terminals - customer can use standard commercial terminal available of their choice.
Read More...Modulbox-Dualmount-70
Date : Wednesday, 14 September 2011
Modulbox-Dualmount-70
Rail Mount and Wall Mount
Designed as per DIN43 880 (MCB Type)
Modulbox-Dualmount-70 - a versatile, compact enclosure is ideal for housing medium size control devises. Modulbox offers wide designing option with three ways in PCB mounting and with customer specific solution in termination / connectors. Enclosure is having wall as well as DIN rail mounting facility. It is designed as per DIN 43880 has cover face of 45mm high enables it to mount within large international style enclosures / distribution system with 45 mm cutouts like MCB. Modular enclosure offers packaging to wide range of applications from Instrumentation, automotive industry to home/building automation. Typical applications are Relays, Timers, Transducers, Transmitters, Thermostat, Sensing and Monitoring Devices.
Features
* Dimensional size per DIN 43 880 - Can be mounted with Distribution system along with MCB
* Knockout blanks for individual terminal configuration
* Snap-together design speeds up assembly.
* Three PCBs provision - Base PCB fixed on Base Plate, Vertical and Horizontal PCBs for which cover has integral molded guides.
* Innovative Clips design facilitates Wall / Rail Mount to Enclosures by changing its position in Base plate.
* Max. 24 Terminal (12+12) - standard 5mm pitch fixed OR Plug-In type.
* Closed cover available for front side mating connectors like D-sub OR for any other option.
* Air ventilation - having slots for ventilation.
* Protection - IP20 (finger protected) Protection against accidental contact.
* Terminals are optional - Enclosure supplied with / without terminals - customer can use standard commercial terminal available of their choice.
Read More...